Your Cart is Empty
Techs On Call Every Day
Overhead crane Installation
Bridge, gantry, and jib cranes designed, fabricated, and installed by one team, then load tested before your first lift.
Request A Crane Install
CRANES & HOISTS SINCE 1964
OSHA COMPLIANT
CMAA MEMBER
24/7 Emergency Response
Same Day Service Utah & Idaho
Any Brand
Any Crane
Specialized Installations
Jib Crane Installation
Overhead Crane Installation | Utah & Idaho
HOJ is a crane installation company with engineering, fabrication, and installation under one roof.
Certified welders and crane engineers handle bridge crane installation, gantry cranes, jib cranes, and crane rail installation across Utah, Idaho, Wyoming, Montana, Nevada, Arizona, and Colorado.
Every new crane is load tested before its first lift.
What We install
Sized to your building, your loads, and your workflow.
- Single girder bridge cranes:the workhorse for most facilities
- Double girder bridge cranes:higher capacities and longer spans
- Gantry cranes:full and semi-gantry, indoor and yard
- Jib cranes:freestanding and wall-mounted workstation coverage
- Runways and rails:crane rail installation, new runway systems, extensions
- Hoists and electrification:conductor bars, festoon, radio controls
On-Site in Hours Not Days
Our response times per Area
- Salt Lake Valley = 1 to 3 hours
- Utah = Same Day
- Boise & Idaho Falls Areas = Same Day
- Wyoming, Montana, Nevada, Arizona = 24 to 48 Hours
Installation Times
Retrofit quotes take 1 to 2 weeks, with every component verified against the manufacturer and your crane's engineer.
Modernization projects typically run 4 to 8 weeks. For new installations, schedules depend on equipment lead times, so we quote real dates, not best cases.
WHAT TO EXPECT
One call today, and your cranes are documented, compliant, and off your worry list.
Reach Out
A site assessment and an engineered quote, verified with the manufacturer.
Build
In-house fabrication by certified welders, coordinated around your production schedule.
First Lift
Installation, load test to 125%, operator orientation, and your documentation.
Built to OSHA and CMAA Standards
You get a written report listing every deficiency and what it takes to pass.
Hand our technician a PO and many repairs happen on the spot, same visit. We work with you until the crane is compliant and back in service.
Modernization and Retrofits
Aging crane, sound structure? We modernize controls, power, and wiring, add VFDs and radio remotes, and bring runways to OSHA compliance.
Most runways have a power bar but no ground bar; we fix that. Our crane engineers plan retrofits at no charge.
Your Installer Becomes Your Service Team
The company that installs your crane keeps it running. Planned maintenance, 24/7 emergency response, stocked parts, annual runway surveys, and your crane's drawings on file.
One call for the life of the overhead crane.
60 Years of Crane Installations
HOJ has designed, fabricated, and installed more overhead cranes in Utah than any other company.
Reach Out Today!
WHY OUR CUSTOMERS DON'T SHOP AROUND
FAQs
Who should inspect a crane?
Depends on the inspection level. Pre-shift checks can be done by your trained operator. Frequent inspections require a designated person.
Periodic inspections should be performed by a qualified crane inspector, and most facilities use a third party for documentation and objectivity.
HOJ inspections are performed by CICB certified inspectors.
When should a crane be inspected?
Beyond the scheduled frequent and periodic intervals, OSHA requires inspection before first use for new cranes, after alterations or repairs, and before returning to service after sitting idle.
If you cannot produce the last documented inspection for a crane, it is due now.
How much does a crane inspection cost?
Cost depends on how many cranes you have, their capacity, and the inspection class required. HOJ quotes inspections over the phone in one call, with an emailed estimate.
Load testing and planned maintenance are separate services, but we can handle them in the same trip, saving you a second visit.
READY TO GET STARTED?
REACH OUT TO US TODAY
Whether it’s a project, product, repair or service, let’s chat to see if we can make your warehouse operations more efficient.
READY TO GET STARTED?
REACH OUT TO US TODAY
Whether it’s a project, product, repair or service, let’s chat to see if we can make your warehouse operations more efficient.