Your Cart is Empty
Techs On Call Every Day
Overhead crane inspection
OSHA and ASME compliance inspections for bridge, gantry, and jib cranes, scheduled same day by CICB certified inspectors.
Request A Crane Inspection
CRANES & HOISTS SINCE 1964
OSHA COMPLIANT
CMAA MEMBER
24/7 Emergency Response
Same Day Service Utah & Idaho
Any Brand
Any Crane
Testing That Proves Capacity
Crane Load Testing
Overhead Crane Inspection | Utah & Idaho
HOJ inspects overhead cranes across Utah and Idaho to OSHA 1910.179, ASME B30, CMAA, and MSHA requirements. CICB certified inspectors handle frequent, periodic, and annual inspections for any brand.
Every inspection ends with a documented report, most scheduled same day.
Overhead Crane Inspection Checklist
What our inspectors examine on every crane.
- Hooks and latches:throat opening, twist, cracks, latch function
- Wire rope and load chain:broken wires, stretch, corrosion, end connections
- Hoist inspection:brakes, gearing, limit switches, drum and sheave wear
- Structure:girders, end trucks, welds, bolts, wheels
- Runway and rails:alignment, rail wear, fastenings
- Electrical:conductor bars, festoon, pendants, radios, contactors
- Records:documented report with photos of every deficiency
On-Site in Hours Not Days
Our response times per Area
- Salt Lake Valley = 1 to 3 hours
- Utah = Same Day
- Boise & Idaho Falls Areas = Same Day
- Wyoming, Montana, Nevada, Arizona = 24 to 48 Hours
OSHA and ASME Inspection Requirements
OSHA 1910.179 requires frequent inspections, daily to monthly, and periodic inspections at 1 to 12 month intervals.
Hoists on monorails, jib cranes, and single girder cranes fall under ASME B30.16. We build your schedule to match and remind you before every deadline.
WHAT TO EXPECT
One call today, and your cranes are documented, compliant, and off your worry list.
Reach Out
Call or send the form. Most inspections are scheduled the same day.
On-Site Inspection
A CICB certified inspector examines the crane, any brand, any installer.
Your Report
Documented results, a deficiency list, and repairs on the spot with a PO.
If Your Crane Fails Inspection
You get a written report listing every deficiency and what it takes to pass. Hand our technician a PO and many repairs happen on the spot, same visit. We work with you until the crane is compliant and back in service.
60+ YEARS OF CRANE EXPERIENCE
HOJ has inspected, repaired, and installed more overhead cranes in Utah than any other company. Reach out Today!
WHY OUR CUSTOMERS DON'T SHOP AROUND
FAQs
Who should inspect a crane?
Depends on the inspection level. Pre-shift checks can be done by your trained operator. Frequent inspections require a designated person.
Periodic inspections should be performed by a qualified crane inspector, and most facilities use a third party for documentation and objectivity.
HOJ inspections are performed by CICB certified inspectors.
When should a crane be inspected?
Beyond the scheduled frequent and periodic intervals, OSHA requires inspection before first use for new cranes, after alterations or repairs, and before returning to service after sitting idle.
If you cannot produce the last documented inspection for a crane, it is due now.
How much does a crane inspection cost?
Cost depends on how many cranes you have, their capacity, and the inspection class required. HOJ quotes inspections over the phone in one call, with an emailed estimate.
Load testing and planned maintenance are separate services, but we can handle them in the same trip, saving you a second visit.
READY TO GET STARTED?
REACH OUT TO US TODAY
Whether it’s a project, product, repair or service, let’s chat to see if we can make your warehouse operations more efficient.
READY TO GET STARTED?
REACH OUT TO US TODAY
Whether it’s a project, product, repair or service, let’s chat to see if we can make your warehouse operations more efficient.