Your Cart is Empty
Techs On Call Every Day
jib crane installation
Free standing, wall mounted, and column mounted jib cranes engineered, installed, and load tested across Utah and Idaho.
Request A Local Jib Crane
CRANES & HOISTS SINCE 1964
OSHA COMPLIANT
CMAA MEMBER
24/7 Emergency Response
Same Day Service Utah & Idaho
Any Brand
Any Crane
Engineered Before It's Installed
A jib crane is only as good as what it stands on. Our crane engineers size the jib, the hoist, and the foundation or mounting structure to your load, duty cycle, and building before anything gets bolted down.
Free Standing, Wall Mounted, or Column Mounted
Free standing jibs give full 360-degree rotation and need a proper concrete foundation.
Wall and column mounted jibs cost less and use your existing building steel, with rotation up to 200 degrees.
We assess your floor, steel, and coverage area, then recommend the configuration that fits the work.
Capacity range. Workstation jibs for repetitive lifts up to heavy-capacity units for fabrication and machine shops.
Custom Fabrication In-House
Our fabrication division runs certified welders with a full shop and tooling.
When standard hardware doesn't fit your structure, we fabricate the steel ourselves instead of waiting on an outside vendor, the same capability we use to build cranes across the state.
Load Tested Before You Lift
- 125% of rated capacity
- Certified to OSHA and ASME standards
- Our own weights brought to your site
- Documented in a report you keep
Every jib we install gets load tested on-site before handoff, so the first lift your team makes is on a certified crane.
WHAT TO EXPECT
One call today, and your cranes are documented, compliant, and off your worry list.
Reach Out
Call or send the form. We gather your load, span, and building details on the first conversation.
On-Site Assessment
An engineer confirms the site, the foundation or steel, and quotes the full installed cost.
Back To Lifting
Install, load test, and certification, with planned maintenance available from day one.
Serviced by the Same Company That Installed It
After the install, the same company answers the phone for inspections, repairs, and parts.
CICB-certified inspectors handle your OSHA and ASME schedule, techs run boom trucks with common wear parts on board, and CM, R&M, and Konecranes hoist parts sit in our stock.
One equipment record. Every service on your jib stays in your file with us from day one.
Jib Crane Parts
Hoists, pendants, and wear components for your jib come from our own stock.
We carry CM, R&M, and Konecranes parts, quote in 24 to 48 hours, and ship same-day on approval.
Idaho's Crane Authority Since 1964
HOJ has engineered, fabricated, and installed cranes since 1964, more than anyone in Utah.
A jib install comes with the backing of a full-service crane operation: engineering, fabrication, parts, inspections, and 24/7 service under one roof.
- 7,800+ service calls completed in the last four years.
- In-house engineering and fabrication on every project.
- Exclusive R&M dealer stocking CM and Konecranes parts.
- CICB-certified inspectors working to OSHA and ASME standards.
- Any brand, any crane inspected, repaired, and modernized.
- Utah and Idaho same-day coverage, with Wyoming, Montana, Nevada, and Arizona served in 24 to 48 hours.
WHY OUR CUSTOMERS DON'T SHOP AROUND
FAQs
What size jib crane do I need?
Capacity, span, and duty cycle determine the size, and undersizing shows up as deflection and early wear. Our engineers size the jib and hoist to your actual loads and lift frequency before quoting, so the crane matches the work instead of a catalog guess.
Should I choose a free standing or wall mounted jib crane?
Free standing units rotate a full 360 degrees and serve open floor areas. Wall and column mounted units cost less, rotate up to 200 degrees, and use your existing building steel. Coverage area, rotation needs, and your structure decide it, and we walk the site with you before recommending either.
How much does a jib crane installation cost?
Capacity, span, and configuration drive the price, so a workstation jib and a 5-ton free standing unit are different projects. We quote after a site assessment so the number reflects your building and your loads.
Where can I buy a jib crane in Utah?
HOJ sells, engineers, and fabricates cranes from our Salt Lake City headquarters, with any manufacturer's jib available and R&M, CM, and Konecranes hoists in stock. Sales coverage runs across Utah, Idaho, and the surrounding states.
READY TO GET STARTED?
REACH OUT TO US TODAY
Whether it’s a project, product, repair or service, let’s chat to see if we can make your warehouse operations more efficient.
READY TO GET STARTED?
REACH OUT TO US TODAY
Whether it’s a project, product, repair or service, let’s chat to see if we can make your warehouse operations more efficient.